Connect a Plaato Airlock
Log a Plaato Airlock's bubbles per minute and temperature in BrewForge through a community server running open-plaato-keg, and see fermentation activity on the brew's chart.
The Plaato Airlock counts the bubbles in your airlock. Plaato has shut down its own cloud, but community servers running open-plaato-keg (self-hosted, or a public server for former Plaato users) receive the airlock's data and can forward it to BrewForge.
The airlock measures bubbles per minute (bpm) and temperature. It does not measure gravity, so it shows when fermentation starts, peaks and slows down, not how far it has attenuated.
Setup
Connect your airlock to a community server running open-plaato-keg. Depending on the server, this can mean re-flashing the airlock; follow the server's instructions.
In BrewForge, add a device of type Plaato Airlock and copy its webhook URL. The Connect step shows the same setup steps as below.
On the server, open the airlock's settings, enable the Brewfather integration and paste the webhook URL (including ?key=…) as its URL.
What BrewForge reads
| Field | Used as |
|---|---|
bpm (or bubbles_per_min) | Bubbles per minute. |
temp (or temperature) | Temperature; converted from Fahrenheit when temp_unit (or unit) is °F/fahrenheit. |
sg, og, batch_volume | Ignored: the server only repeats values you typed in. |
In BrewForge
On the Devices page the airlock is listed under Hydrometers and airlocks, with its latest bubbles per minute and temperature (for example 14 bpm · 19.6 °C). On its device page, Recent data has a Bubbles/min column. There is no gravity offset for an airlock, because it sends no gravity.
On the brew
Every reading becomes a fermentation reading of the brew with its bubbles per minute and temperature. The fermentation chart then gets a Bubbles/min layer with its own axis on the right; switch it off like the other layers. The layer only appears on brews that received bubbles per minute.
Since there is no gravity, the projection, attenuation and the spunding forecast need gravity readings from another source, for example a hydrometer sample you enter by hand.
Other devices with bubbles per minute
Any device that sends bubbles per minute can use a Custom Stream: map its field to Bubbles per minute.