Strike Water Temperature Calculator
Strike water calculator: how hot to heat your mash water to hit the target mash temperature, from grain weight, grain temperature and water-to-grain ratio, with an optional cold mash tun correction.
The grain and a cold mash tun pull heat out of the strike water, so the water has to be hotter than the mash temperature you want. The strike water calculator tells you how much hotter, and how much water to heat.

Open it with Calculators in the sidebar → Strike water. You enter the mash on the left; the answer is on the right (on a phone it stays pinned at the bottom of the screen while you scroll through the inputs).
Mash
| Field | What to enter |
|---|---|
| Units | The button in the section bar. Temperature in °C or °F, Volume and weight in L, kg or gal, lb. It starts in your units from Settings; switching converts the values you entered. |
| Target mash temperature | The rest you want to hit. Typical rest next to it fills in a common one: Beta amylase (dry) 63 °C, Single infusion (balanced) 67 °C, Alpha amylase (full) 70 °C, Protein rest 52 °C or Mash out 76 °C. |
| Grain weight | The whole grain bill. |
| Grain temperature | Usually room temperature. Measure it if the grain was stored somewhere cold. |
| Strike water as | Ratio or Volume. Switching keeps the result: the other field is filled from the current plan. |
| Water-to-grain ratio (Ratio) | Mash tun with sparge: 2.5–3.5 L/kg (1.2–1.7 qt/lb). Full-volume BIAB: 4–6 L/kg (1.9–2.9 qt/lb). |
| Strike water volume (Volume) | All the water that goes into the mash at dough-in. The hint below shows the resulting ratio. |
Mash tun
The closed Mash tun fold below the inputs shows your current choice next to its title (for example "kettle or preheated tun"). Open it to change it:
- Kettle or preheated tun: no tun correction. A kettle you heated the water in (BIAB, all-in-one systems) or a preheated tun is already hot, so only the grain takes heat.
- Cold mash tun: the strike water also has to warm up the tun. Pick the Material (Stainless steel, Aluminum, Plastic cooler) and enter the Empty tun weight, or pick Known thermal mass and enter the Thermal mass (water equivalent), for example the Tun heat capacity you measured in your equipment profile. Tun temperature is the temperature before dough-in; it follows the grain temperature until you change it.
The answer
Heat strike water to shows the strike temperature, with the water volume underneath ("15.0 L of water, then stir in the grain"). Below it:
- Target mash: the temperature you entered.
- Strike water: volume and water-to-grain ratio.
- To warm the grain: how many degrees above the mash temperature the grain needs.
- To warm the mash tun: the same for a cold tun, with its thermal mass in water equivalent; none for a kettle or preheated tun.
- Strike temperature in °F (or in °C): the result in the other unit.
If the strike temperature is at or above boiling, the answer turns into a warning: use more water or preheat the tun. Without a grain weight or water the answer asks you to enter them.
How it's calculated below the answer opens the formula. Folds you open stay open the next time you use a calculator.
A heat balance at dough-in (Palmer's infusion equation plus the tun):
T_strike = T_mash + (0.4 / R) × (T_mash − T_grain) + (M / W) × (T_mash − T_tun)
Rwater-to-grain ratio in L/kg (qt/lb is converted with × 2.0839),Wstrike water in liters- 0.4: specific heat of grain relative to water
M: the tun's thermal mass in liters of water equivalent,empty weight in kg × specific heat: stainless steel 0.12, aluminum 0.22, plastic cooler 0.3. 0 for a preheated tun or a kettle.
To warm the grain is the second term, To warm the mash tun the third. Heat lost to the room isn't included: note how far you miss on brew day and adjust the target.
Example: 67 °C mash, 5 kg grain at 20 °C, 3 L/kg (15 L). Kettle or preheated tun: 67 + 0.4 / 3 × 47 = 67 + 6.3 = 73.3 °C. In a cold 4 kg plastic cooler at 20 °C (M = 4 × 0.3 = 1.2 L): 73.3 + 1.2 / 15 × 47 = 73.3 + 3.8 = 77.0 °C.
Related
- Step mash: more than one rest.
- Mash steps: strike water and infusions in a recipe.
- Calculator API:
GET /api/public/calc/strike-water