BrewForge Docs

Spunding Valve Calculator

Spunding calculator: the spunding valve pressure for your CO₂ target at fermentation temperature, and the gravity at which to close the fermenter so the yeast carbonates the beer.

Spunding means closing the fermenter shortly before fermentation ends, so the yeast's last CO₂ carbonates the beer. A spunding valve keeps the pressure at the level that gives your target carbonation. The calculator tells you what to set the valve to and when to close it.

The Spunding calculator: 4.7 g/L at 20 °C needs 26.0 psi (1.79 bar); close the valve at 4.2 °P, 1.7 °P above the expected FG, about 7 hours from the current reading of 5 °P

Open it with Calculators in the sidebar → Spunding. Only spund in pressure-rated vessels such as kegs or pressure fermenters.

Inputs

The Units button in the Carbonation bar switches gravity between SG and °P and temperature between °C and °F; it starts with your settings and converts the values you entered. CO₂ (volumes or g/L) and pressure (psi or bar) follow your settings.

Carbonation

FieldWhat to enter
Beer style (optional)Pick a style to fill in its typical Target CO₂; the line below shows the style's range.
Target CO₂Default 2.4 vol (4.7 g/L).
Beer temperatureWhile the valve is closed. Warmer beer needs more pressure.

Gravity

FieldWhat to enter
Expected final gravityWhere fermentation will end. Without it there is no trigger gravity.
Current gravityYour latest reading.

Two closed folds below; their titles show the current values:

  • Safety margin: closes the valve a bit earlier to cover headspace, leaks and FG error. Default 4 points in SG, 1 °P in °Plato.
  • Time estimate: Original gravity and Days since pitching, for a rough estimate of when you reach the trigger gravity.

Results

  • The big number: Set the valve to, the pressure in your pressure unit, with the other unit and the beer temperature below.
  • Close the valve at: the trigger gravity, with how far it is above the expected FG.
  • To go from your reading: how far your current gravity still has to drop. If you're already at or below the trigger, a warning says so: close the valve now and top up with CO₂ later if the beer is undercarbonated.
  • Time until you close it (rough): extrapolates the average rate so far, in hours or days. Check with a reading.
  • The breakdown: CO₂ already in the beer, Extract for the CO₂ target and the Safety margin.

Three folds under the results:

  • Valve pressure by temperature: a table from 6 to 24 °C in 2 °C steps with the pressure in psi and bar for your CO₂ target. The row closest to your beer temperature is highlighted. If the beer temperature changes while the valve is closed, set the valve to the value for the new temperature.
  • Tips: set the valve before you close it, spund only in pressure-rated vessels, and follow the table when the temperature changes.
  • How it's calculated: the formulas.
How BrewForge calculates spunding

Valve pressure: the same formula as force carbonation (section Keg · force carbonation), with the fermentation temperature.

Trigger gravity: the beer already holds the residual CO₂ for its temperature (same curve as for priming sugar: 3.0378 − 0.050062 × T + 0.00026555 × T² with T in °F, held at its minimum above 34.6 °C). Each gravity point that still ferments adds about 0.54 volumes of CO₂.

points for CO₂ = (target CO₂ − residual CO₂) / 0.54

trigger gravity = expected FG + (points for CO₂ + safety margin) / 1000

Time estimate: hours = points still to go × (days since pitching × 24) / points already fermented, with points already fermented = (OG − current gravity) × 1000 and points still to go = (current gravity − trigger gravity) × 1000.

In °Plato the safety margin and the extract for the CO₂ target are shown as points / 4 (4 points ≈ 1 °P).

Example (the defaults in SG): 2.4 vol at 20 °C, expected FG 1.010, margin 4 points. Valve pressure 26.1 psi (1.80 bar). Residual CO₂ 0.86 vol, so (2.4 − 0.86) / 0.54 = 2.85 points; with the margin 6.85 points. Close the valve at 1.010 + 0.00685 ≈ 1.017. From OG 1.050 the beer reached 1.020 in 3 days (30 points in 72 hours), so the remaining 3.2 points take about 8 hours. With CO₂ in g/L the target reads 4.7 g/L (2.40 vol at 1.96 g/L per volume, rounded), which gives 26.0 psi.

On this page