Dilution and Boil-Off Calculator
Missed your gravity? Calculate how much water to add to lower the wort gravity, or how much longer to boil to raise it, from your current reading, volume and boil-off rate.
Your pre-boil or post-boil reading is off target? The Gravity correction calculator has two modes, switched above the inputs: Add water when the gravity is too high, Boil longer when it is too low. Each mode keeps its own readings, so switching back and forth doesn't lose what you typed.
Open it with Calculators in the sidebar → Gravity correction. Both modes use a reading from a cooled sample and the volume it belongs to. On a phone the answer stays pinned at the bottom of the screen while you scroll through the inputs.
Add water

| Section | Field | What to enter |
|---|---|---|
| Wort now | Units | The button in the section bar: Gravity in SG or °P, Volume in L or gal. It starts in your units from Settings; switching converts the values you entered. |
| Current gravity, Current volume | Your reading now and the volume of wort. | |
| Target | Target gravity | The gravity you want to reach. It must be below the current gravity, otherwise the field is marked and the answer says so. |
| Or try a water amount (optional) | Shows the gravity after adding exactly this much water. |
The answer, Add water, shows the water to add and "to reach" the target gravity. Below it: Final volume, Final gravity, and, if you tried a water amount, With … of water with the gravity and volume it gives.
Tips below the answer: use boiled and cooled water, stir well and take a new reading before pitching. Diluting after the boil also lowers the bitterness.
Boil longer

The same fields, plus the Boil-off rate under Wort now: the volume your kettle loses per hour at a rolling boil (L/hr or gal/hr). Without it the answer asks for it. The Target gravity must be above the current gravity; Or try a boil time (optional) shows the gravity after boiling that many more minutes.
The answer, Boil longer by, shows the extra boil time and "to reach" the target gravity. Below it: Final volume, Boils off (the volume that evaporates), and, if you tried a boil time, With … more minutes with the gravity and volume it gives. If that time would boil off all of the wort, you get a warning instead.
Tips: start the extra time before your first hop addition so the hop schedule stays the same. A longer boil darkens the wort a little. To keep your volume, add dry malt extract instead.
How it's calculated
The How it's calculated fold below the answer shows the formula. It accepts gravities above 1.000 and below 1.200 SG.
The amount of sugar stays the same, only the water changes. In gravity points (points = (SG − 1) × 1000, °Plato is converted to SG first):
final volume = current volume × current points / target points
water to add = final volume − current volume
volume to boil off = current volume − final volume, and extra boil time (min) = volume to boil off / boil-off rate × 60
Trying an amount works the other way round: final points = current points × current volume / final volume, with final volume = current volume + water or current volume − boil-off rate × minutes / 60.
Example, adding water: 23 L at 1.060 to 1.050 → 23 × 60 / 50 = 27.6 L, so add 4.6 L.
Example, boiling longer: 28 L at 1.040 to 1.050 with 4 L/hr → 28 × 40 / 50 = 22.4 L, boil off 5.6 L, which takes 5.6 / 4 × 60 = 84 minutes (1 hr 24 min).
Related
- Calculator API:
GET /api/public/calc/dilutionandGET /api/public/calc/boil-off